关键词 |
嵌入式温度控制器报价,嵌入式温度控制器出售,嵌入式温度控制器批发,嵌入式温度控制器出售 |
面向地区 |
全国 |
在正常情况下,仪表处于正常工作状态, 此时按下 SET 键持续 3 秒, 进入系统设置模 式,按回车键输入密码, 出厂默认为 0000 , 密码正确(显示 YES) ,自动进入主菜单。 进入主菜单后区域 1 显示"CH1" ,按回车 键进入通道 1 工作参数设置, 按左右键则切 换到其他同菜单,这菜单有"CH2", "CH3","COMM","DISP","CTRL","tr. 1", "tr. 2", "VErn" , 分别为设置通道 2 ,通 道 3 的工作参数,设置通讯,设置显示模式, 按键强制加热、鼓风时间设置,变送 1 设置, 变送 2 设置,查看软件版本。
测量 Measurement 在测量状态下, 区域 1 、2 、3 显示当前 测量通道及温度、湿度值,并且三个传感器通 道的温湿度值循环测量、显示。 Under measuring condition , Area 1, 2, 3 display currently: measuring channel and temperature value, humidity value , temperature value,humidity value circling measurement and display of three sensor's channels.
在正常工作状态下,按住左方向键大于 3 秒,所有打开的通道无条件加热;按住右方向 键大于 3 秒, 所有打开的通道无条件鼓风。 Under the normal working condition, hold pressing the left directional key about 3 seconds,all the allowed channels are in heating; hold pressing the right directional key over 3 seconds,all the allowed channels are in blowing .
全国嵌入式温度控制器热销信息