马鞍山嵌入式温度控制器出售,多功能安科瑞嵌入式温度控制器

测量 Measurement 在测量状态下， 区域 1 、2 、3 显示当前 测量通道及温度、湿度值，并且三个传感器通 道的温湿度值循环测量、显示。 Under measuring condition , Area 1, 2, 3 display currently: measuring channel and temperature value， humidity value , temperature value,humidity value circling measurement and display of three sensor's channels.

在正常工作状态下，按住左方向键大于 3 秒，所有打开的通道无条件加热;按住右方向 键大于 3 秒， 所有打开的通道无条件鼓风。 Under the normal working condition, hold pressing the left directional key about 3 seconds,all the allowed channels are in heating; hold pressing the right directional key over 3 seconds,all the allowed channels are in blowing .

当加热器发生故障，没有按条件工作时， 相应的加热故障指示灯点亮;当温度超过设定 的鼓风降温温度时，相应通道的温度显示数据 闪烁；当仪表本身出现故障时，仪表进行复位。 When the heater is failure,working without as per the normal working condition, the corresponding indicator for heating-fault lights to give alarming.when the temperature exceeds the set value,the data of corresponding channel flashes. Reset when the meter itself fails.